- Analog and digital training kits
- Control & Instrumentation Training Systems
- Device Programmer
- Evaluation Boards for Microcontrollers
- Interfacing and application card
- Microcontroller Training & Development Kits
- Microprocessors Training & Development Kits
- Milling & Engraving Machine
- TMI - Test & Measuring Instruments
- Embeded analyzer
- Ordering info
- PC based USB interface serial flash programmer, support 3.3V to 1.8V Flash in VCC and I/O.
- High programming speed, it can program at 30Mbps, it blank checking, programming and verify a 64 Mb serial flash in 53 second.
- Support all maker's serial flash chip from 512Kb up to 2Gb.
- USB interface : support both USB 1.1 and 2.0.
- Friendly user interface, it has same Labtool family user interface.
- Device insertion / continuity check before programming.
- Mass production mode and quantity / Max failure rate alarm for production.
- Support Windows XP / Vista / 7 / 8.1/ 10
- On board serial flash ISP programming through flat cable
- Support all package through adapters (refer to LabTool-S100 adapter list)
|LABTOOL-S100||PC based Serial Flash programmer with USB interface include 8 pin 150 mil SOIC, 1.27mm pitch serial flash adapter|