2-port CAN Interface Universal PCI boards with 2 kV isolation

Moxa’s new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602

U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.

CP-602U-I_Series_DS.pdf

Datasheet(1)
Manual (2)
Name Action
CP-602U-I Series Datasheet
Name Action
CAN Interface Board Quick Installation Guide
CAN Interface Board Users Manual
  • Features
  • Ordering info
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120 ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided
  • CAN 2.0A and CAN 2.0B supported
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
Available Models
Model No. Description
CP-602U-I 2-port CAN interface Universal PCI board, with 2 KV isolation protection, 0 to 55°C operating temperature
CP-602U-I-T 2-port CAN interface Universal PCI board with 2 KV optical isolation protection, -40 to 85°C operating temperature
Get a Quote