Description
Reviews (0)
  • Security ensured

    CEC1302 Functional Diagram

    This clicker 2 is powered by CEC1302, a 32-bit ARM®-Cortex® MCU from Microchip that integrates a cryptographic engine that provides high level security features.

    • Authentication with public key algorithms (RSA-2048)
    • Integrity with Secure Hash Algorithms (SHA-1, SHA-256)
    • Privacy with symmetric encryption (AES)
    • Entropy with true Random Number Generator

    CEC1302 has 128 KB SRAM, 32 KB boot ROM, and runs at 48MHz.

    Powering Your Inventions

    Battery

    Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for CEC1302 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).

    mikroBus pinout standard

    With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 222 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

    Expanding Your Ideas

    Shields

    No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1×26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

    UART Bootloader Inside

    Bootloader

    To make your prototyping experience as convenient as possible, clicker 2 for CEC1302 is preprogrammed with a UART bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.

    Hardware Debugging

    Debugger

    Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for CEC1302. It’s a fast hardware debugger and programmer that exploits the MCU’s integrated encryption module, enabling secure firmware updating.

    Tech specs

    Pushbuttons, signal LEDs, jumpers, pads for connecting an external ON/OFF switch, here are all the bits and details at your disposal:

    Dimensions

    Processor

    MCU

    • CEC1302 has 128 KB SRAM
    • 32 KB boot ROM
    • 48MHz

    Connectivity

    Connectivity

    • 52 programmable GPIOs
    • 2 mikroBUS host sockets
    • USB Mini-B connector
        MIKROE-1969   clicker 2 for CEC1302

    RECENTLY VIEWED PRODUCTS

    You have not viewed any product yet!
  • Leave a Reply