1-port Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateways

MGate 5111 industrial Ethernet gateways convert data between the Modbus RTU/ASCII/TCP, EtherNet/IP, PROFINET, and PROFIBUS protocols. All models are p

rotected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation. Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in factory automation and process automation. The MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs. For Sytem integration, the MGate 5111 can connect to EtherNet/IP PLC/SCADA systems, such as Rockwell Automation PLCs, to PROFIBUS PLC/DCS systems, or between a new Siemens PLC system that supports PROFINET to an existing PROFIBUS system. The MGate 5111 gateways are designed for easy configuration and quick maintenance. A handy web console can be used to implement remote maintenance tasks, and the configuration wizard UI lets you quickly set up your gateway. A comprehensive collection of troubleshooting tools reduce configuration time and system downtime. The rugged design is suitable for industrial applications such as factory automation, power, oil & gas, water and wastewater, and other process automation industries. Easy Configuration The MGate 5111 series gateway has a friendly user interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection and Modbus maintenance events, and users can review log data remotely through the web console. Variety of Maintenance Functions The MGate 5111 supports Protocol Diagnose and Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues caused by incorrect software parameters, like slave IDs and register addresses, or incorrect command configurations, can be fished out with Protocol Diagnose and Traffic Monitor, which let you capture and check data to easily identify root causes. MGate 5111 gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. When a PROFIBUS cable gets disconnected, the fault protection function executes actions on end devices identified by a pre-defined value set by the user.

Industries
Building Automation,Descrete Automation,Mining,Oil & Gas,Power,Process Automation,Smart City/Survaliance
Datasheet(1)
Manual (2)
Techincal Notes(1)
Name Action
MGate 5111 Series Datasheet
Name Action
MGate 5111 Quick Installation Guide
MGate 5111 User's Manual
Name Action
How to Use the TIA Portal to Set a Siemens PLC and the MGate 5111
  • Features
  • Ordering info
  • Built-in Ethernet cascading for easy wiring
  • MicroSD card for configuration backup/duplication, and event log
  • Redundant dual DC power inputs and relay output supported
  • Serial port with 2 kV built-in isolation protection 
  • -40 to 75°C wide operating temperature models available
  • Supports EtherNet/IP adapter or PROFINET IO device
  • Security features based on IEC-62443
  • Built-in traffic monitoring/diagnostics/status monitoring and fault protection
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII/TCP master or slave
Available Models
Model No. Description
MGate 5111 Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateway, 0 to 60°C operating temperature
MGate 5111-T Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateway, -40 to 75°C operating
Optional Accessories
Model No. Description
WK-51-01 Wall-mounting kit, 51mm wide
Mini DB9F-to-TB DB9 Female to Terminal Block connector
Get a Quote