Form Factor :-
Type Small metal housing that encloses advanced ARM-based 32-bit processor; supports both wireless and Ethernet connections
Dimensions 54 x 40 x 13.3 mm (2.13 x 1.57 x 0.52 in)
Automatic Network Selection :-
Wireless or Ethernet The WE-2100T will activate the Ethernet connection if detected at boot-up. If an Ethernet connection is not detected, the WE-2100T will choose wireless as the communication interface. Which interface to use can also be configured with the WE-2100T's configuration utilities.
LAN Interface :-
Number of Ports 1
Speed 10/100 Mbps, Auto MDI/MDIX
Connector(s) 44-pin dual-in-line
Magnetic Isolation Protection 1.5 KV built-in
WLAN Interface :-
Standard Compliance IEEE 802.11a/b/g
Network Mode Infrastructure mode (a/b/g), Ad-Hoc mode (b/g)
Spread Spectrum Technology DSSS, CCK, OFDM
Transmit Power 5.15 to 5.25 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps 5.725 to 5.825 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps
2.412 to 2.483 GHz: 17 dBm @ 6 Mbps; 15 dBm @ 54 Mbps
2.412 to 2.472 GHz: 18 dBm @ 1 to 11 Mbps
Receive Sensitivity 5.15 to 5.25 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -72 dBm
5.725 to 5.825 GHz: 6 Mbps @ -89 dBm; 54 Mbps @ -72 dBm
2.412 to 2.483 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -73 dBm
2.412 to 2.472 GHz: 11 Mbps @ -87 dBm; 1 Mbps @ -94 dBm
Transmission Rate 802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps
Transmission Distance Up to 100 meters (in open areas)
Wireless Security AES, WEP 64/128-bit, WPA, WPA2, 802.11i
802.11i Authentication TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPv2, TTLS/PAP, TTLS/CHAP, TTLS/MSCHAP, TTLS/MSCHAPv2, TTLS/EAP-MSCHAPv2, TTLS/EAP-GTC, TTLS/EAP-MD5, LEAP
Channels North America: CH1 to CH11, 5150-5825 MHz
Europe: CH1 to CH13, 5150-5875 MHz
Japan: CH1 to CH14, 5150-5350 MHz
Antenna Connector Reverse SMA
Antenna Gain 2 DBi
Serial Interface :-
Serial Standards Port 1: TTL
Port 2: TTL console port
Number of Ports 1
Serial Signals :-
TTL (Port 1) TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
TTL (Port 2) TxD, RxD, GND
Serial Communication Parameters :-
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, DTR/DSR
Baudrate 50 bps to 921.6 Kbps (supports Any Baudrate in this range)
Software :-
Network Protocols ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, SSH, HTTPS
Driver Support Windows COM driver (for Windows 98, ME, NT, 2000, XP, 2003, XP x64, 2003 x64, Vista), Linux Real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX
Configuration Options Web Console, Serial Console, Telnet Console, Windows Utility (for Windows 98, ME, 2000, XP, 2003, Vista), Serial command mode (configured through the data port)
Supported Operating Modes Real COM, TCP Server, TCP Client, UDP, RFC2217
Power Requirements :-
Input Voltage 3.3 VDC (±5%)
Power Consumption 921.6 Kbps (full speed): 540 mA
Idle: 190 mA
Ethernet mode: 670 mA
Inrush current: 2100 mA
Regulatory Approvals :-
Safety EN60950, CUL TÜV
EMC CE EN55022 Class A, FCC Part 15 Subpart B Class A
Wireless CE ETSI EN 301 489-17
CE ETSI EN 301 489-1
FCC Part 15, Subpart B, Class A
FCC Part 17, Subpart B, Class A
Environmental Limits :-
Operating Temperature 0 to 55°C (32 to 131°F)
Operating Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Surface Temperature :-
Top Panel 43.0°C, when air temp = 25°C
55.0°C, when air temp = 55°C
(at full baudrate of 921.6 Kbps)
Bottom Panel 44.5°C, when air temp = 25°C
67.0°C, when air temp = 55°C
(at full baudrate of 921.6 Kbps) |
Serial Servers
