• EasyPSoC4 is a development system that supports a wide range of PSoC microcontrollers.
• Very fast, on-board USB 2.0 programmer with a simplified driver installation.
• MMC/SD cards enable you to add mass storage support to your prototype device. EasyPSoC MCU Cards support PSoC microcontrollers in QFN, SOIC, SSOP and TQFP packages.
• On-board stand-alone CAN (Control Area Network) controller MCP2510. EasyPSoC4 includes an on-board Touch Screen controller with a Touch Panel connector.

This product is manufactured by MIKROELECTRONICA.

* EasyPSoC3 development system is a full-featured development board for the Cypress PSoC micro controllers.

* It was designed to allow students or engineers to easily exercise and explore the capabilities of the PSoC micro   controllers.

* It allows the PSoC micro controller to be interfaced with external circuits to a broad range of the peripheral devices,
  allowing the user to concentrate just on the software.

* Figure on the first page illustrates the first contact with the development system.

* On a silkscreen there are marks beside every component.

* These marks describe connection to micro controller, operation modes, and some other useful notes.

* As a result, need for additional schematics is minimized, because all information are already on the
  board.

• RS-232 communication with PC or another microcontroller.
• System can be easilyconfigured viaclearly marked diP switches.
• Digital thermometer
• DS1820 for measuringtemperature from -55ºC to 125ºC.
• Support for Microcontrollers in DIP8,DIP14, DIP18,DIP28 and DIP40 socket.
• 2 potentiometers areavailable for testingAD conversion and comparators.
• Power Supply select - USB or external.
• 4 seven-segment digits in multiplexmode.
• All pins areconnected to ICDconnectors for further connecting 32 diodes fordisplaying states ofall pins on the microcontroller at the same time.
• R.T.C. - Real Time Clock for applications which need Real Time data.
• 32 buttons for program developingneeds.
• Very fast USB 2.0 programmer on board.
• DIP switch for separating port A
• pins when they are used as A-D inputs.
• LCD display plugs in via a connector on PC board.
• Selectable contrast :GLCD or for LCD. On the same connector user can connect GLCD or LCD in 8-bit mode.
• CAN module for communication with other microcontrollers.
• MMCSD card slot - For MMCSD memory cards.
• Compact Flash card slot - For Compact Flash memory cards.
• LCD 2x16 in 8-bit mode.
• GLCD - Graphic LCD.

EasyPSoC 4 Development Board