The VIA EITX-3000 is designed for ultra-thin embedded applications and can withstand temperatures ranging from -10°C up to 70°C. The powerful VIA Nano processor and VX800 media system processor are placed on the reverse of the board, allowing greater space saving for passive cooling and entirely fanless embedded designs.

The VIA EITX-3000 includes an on-board DC-DC converter which supports both AT and ATX modes, configurable via an on-board switch, supporting a wide range of power input voltage, from DC 7V ~ DC 36V. The multi-display options of the VIA EITX-3000 mean that it’s ideally suited for high-end multimedia applications including POS, Kiosk, ATM, HMI, factory automation, POI and digital signage.

The VIA EITX-3000 board takes advantage of the latest Em-ITX form factor specification from VIA, adding longer dual I/O coastlines to provide space for an array of I/O options including dual LVDS ports, a VGA port, dual Gigabit Ethernet ports, 6 USB 2.0 ports and four COM ports consisting of two BIOS configurable RS-232/422/485 serial ports, and two RS-232 serial ports.

This product is manufactured by VIA.

Part Number EITX-3000-1N13A1                                                       EITX-3000-1N10A1

Processor
System

Processor                      1.3 GHz VIA Nano™                                                       1.0 GHz VIA Nano™
Front Side Bus Speed      800 MHz                                                                      800 MHz
L2 Cache                       1 MB                                                                           1 MB
Chipset                         VIA VX800 Unifed Digital Media IGP chipset
BIOS                            Award BIOS, 8 MBit SPI Flash BIOS
System Power               Timers Power On ACPI supported
Management          


Memory

Technology                 1 x DDR2 533/667 200-pin SDRAM SODIMM socket
Max. Capacity               Up to 2GB memory size

Graphic

Controller                     Integrated VIA Chrome9™ HC3 DX9 3D/2D graphics with MPEG-2/4  
WMV9 decoding acceleration
Display Memory             Optimized Unifed Memory Architecture (UMA), supports up to 256 MB
frame bufer using system memory
CRT Interface               Onboard 1 x VGA connector
Pixel Resolution support up to 1920 x 1200
LVDS Interface             Supports two 24-bit single-channel LVDS interface connectors
Up to 1280 x 1024 panel resolution for single channel LVDS LCD
Built-in Inverter control signals into the DB-26 connectors
Onboard 5 V/3.3 V LCD power switch (default at 3.3 V)
Dual Independent         Supports CRT + LVDS2, and LVDS1 + LVDS2 at same resolutions, same
Display                         pixel depths, and same refresh rates


Ethernet

Controller                   2 x Onboard VIA VT6130 Gigabit Ethernet controllers
Interface                    Supports two RJ-45 connectors. Supports Wake On LAN (WOL)
Supports Preboot Execution Environment (PXE)
HD Audio

Controller                   VIA VT1708B High Defnition Audio Codec
Interface                    Supports Line-in, Line-out, Mic-in by onboard 2x7-pin headers
Serial

USB                           Six onboard USB ports
2 x USB ports (mini-DIN connector) •
4 x USB ports (pin headers with individual VCC power) •
Serial Ports                 Onboard Fintek F81865 LPC I/O controller Supports 4 COM ports of
2 x RS-232/422/485 by 2 x DB-9 connectors as COM 1 and COM 2,  •
confgurable via BIOS setup
2 x RS-232 by 2 x DB-9 connectors of COM 3 ~ 4 •
Supports RS-485 AutoFlow Control functions of COM1 ~ COM2
Parallel

Printer Ports              1 x PS/2 compatible bi-directional parallel port by onboard 2 x 13-pin
headers
DIO

Digital I/O                 Onboard 2 x 6-pin headers support 8-bit Digital I/O, and 5V/12V power source

Storage
interface
Serial ATA                2 x Onboard SATA II (3 Gbps) ports, Maximum data transfer rate up to 300MB/s
Only support 2.5” of SATA Hard Disk (no support to 3.5” SATA HDD)
Compact Flash          1 x Onboard socket support type I/II CompactFlash disk

H/W Monitoring

Temperature Sensor    Built-in one Thermal Sensor by onboard 1 x 3-pin headers

System Indicator

Power Status          LED One green color LED
HDD Activity            LED One red color LED

Watchdog Timer

Output                 System reset
Interval                 Programmable 1 ~ 255 sec

System Expansion

Em-IO Bus Expansion  Onboard 160-pin Em-IO Bus Expansion interface socket
Interface

Onboard I/O
Connectors

Front I/O Coastline     1 x HDD & PWR LED
2 x RS-232/422/485 COM port connectors as COM 1 and COM2
2 x RS-232 COM port connectors as COM3 and COM4
2 x USB mini-DIN connectors
1 x 2-pole of Phoenix power input connector
1 x ATX power On/Of switch
Rear I/O Coastline     1 x VGA connector
2 x DB-26 connectors for dual 24-bit single channel LVDS interface, as LVDS1 and LVDS2
2 x RJ45 connectors for dual Gigabit Ethernet connection

Onboard I/O
Pin-headers
Onboard I/O           1 of 2 x 15-pin box headers for LVDS1 (co-lay with LVDS1)
Pin-headers             2 of 1 x 3-pin headers for LCD Power 3.3V/5V selection
1 of 2 x 5-pin headers; plus a 2 x 6-pin headers, with individual VCC power support for 4 x                              USB 2.0 ports
1 of 2 x 13-pin headers for LPT port
1 of 2 x 5-pin headers for Line-out, Line-in and Mic-in
1 of 2 x 5-pin headers for thermal sensor
2 of SATA data connectors, only support connection with 2.5” HDD
2 of SATA power connectors, only support 5V power
1 of 1 x 3-pin headers for selecting the AT or ATX model

Onboard DC to DC
Power Supply
Input Voltage         Built-in onboard DC-to-DC converterAccept wide range of Power Input of DC 7V ~ 36V
Supports AT and ATX model

Power Input          1 x 2-pole Phoenix connector
Connector

AT/ATX Selector    Onboard AT/ATX switch by a 1 x 3-pin headers
Fuse Rating           7 A / 125 V

Heatsink

Construction             Aluminum Alloy
Dimensions(WxHxD)   232.6 mm x 53 mm x 124.8 mm

Physical
Characteristics
Form Factor            Em-ITX
Board Dimension     17 cm (W) x 12 cm (L)
Weight                  0.98 Kg (net weight of board plus heatsink only)

Environmental
Specifcation

Operating            From -10°C up to 70°C
Temperature      
Storage               -20°C ~ 70 °C
Temperature
Operating            10% ~ 90%, relative humidity, non-condensing
Humidity

Key Features:

• VIA Nano™ processor (1MB L2 Cache)
• Em-ITX form factor: 17 cm (W) x 12 cm (L)
• Dual-sided multiple I/O connector coastlines
• Em-IO expansion bus socket
• Integrated VIA Chrome9™ HC3, DX9 3D/2D graphics with MPEG-2/4 and WMV9 decoding acceleration
• Two single-channel LVDS display ports
• Two Gigabit Ethernets
• Two RS-232 and two RS-232/422/485
• Six USB ports
• Fanless and ultra low power consumption

{tab= Ordering Information}

EMIO-3210-00A1 6 COM, 2 Parallel Em-IO card