• EasydsPIC6 is a development system that supports 18-, 28- and 40-pin dsPIC30F MCUs.
• Very fast, on-board USB 2.0 programmer with a simplified driver installation. mikroICD is a hardware tool designed for testing and debugging programs on dsPIC30F MCUs.
• Built-in Piezo buzzer enables the develompent system to emit audio signals. 
• Serial COG Display that uses SPI interface is available for displaying text messages.
• Touch Screen controller with a Touch Panel connector.
• 16-bit I/O port expander MCP23S17 that uses SPI communication.
• High-Speed CAN Transceiver MCP2551. On-board Serial EEPROM capable of storing up to 1Kbit of data.

This product is manufactured by MIKROELECTRONICA.

• Connectors for GLCD and LCD in 8-bit mode (displays not included).
• System can be easily configured via clearly marked dip switches.
• 2 potentiometers are available for testing AD conversion and comparators.
• 41 buttons for program developing needs.
• 40 diodes for displaying states of all pins on the microcontroller at the same time
• External power supply can be DC or AC
• All pins are marked on the back of the board
• Power Supply select - USB or external
• Oscillator on board (removable)
• Socket for digital thermometer DS1820 (not included).
• Reset circuit.
• RS-232 communication with a PC or an MCU is performed via DB9 connector and MAX232 level converter.
• System can be configured by means of DIP switches. Each DIP switch configures one part of the system.
• Voltage reference for A/D and D/A converters can be either VCC (5V) or 4.096V. It depends on the programmer's needs.
•  Support provided for MCUs in DIP18, DIP28 and DIP40 packages. EasydsPIC6 comes with a dsPIC30F4013.
• Potentiometer is used for testing multiple A/D conversions. Inputs can be configured via jumpers.
• USB or external power supply source is selected by moving a jumper. Power supply switch turns the system on/off.
• ICD2 connector is used for connecting external programmer/debugger.
• All microcontroller pins are connected to the IDC10 connectors for further expansion.
• 41 LEDs (Light Emitting Diodes) are used to indicate the logic state of all microcontroller pins.

EasyDSPIC6 Development Board.